Description
E6000 Spray Adhesive
E6000 Spray Adhesive is a permanent, multi-purpose latex-based adhesive without the toxic smells, fumes or unhealthy side effects.
It is strong, flexible, water-resistant, resists bleed-through and yellowing and works well on most all materials.
Follow these simple directions when using E6000 Adhesive Sprays:
1. Shake well before use.
2. Protect work area from over-spray.
3. Point spray nozzle away from face.
5. Hold bottle 20-30cm away from surface and Spray.
PAPER, PHOTOS, CARDBOARD & FOIL: Spray a thin coat to one surface. Join surfaces. Apply pressure periodically, ensuring secure contact. Dry 1-3 minutes.
POROUS MATERIALS (including foams and Styrofoam): Spray a heavy coat to both surfaces to be joined. Mate surfaces together. Allow to dry. Maximum strength usually achieved in 1-5 hours. Up to 12 hours for styrofoam.
to 12 hours for Styrofoam.
NON-POROUS MATERIALS: Spray a light coat to one surface. Mate surfaces together. Allow to dry.
IMPORTANT – CLEAN NOZZLE AFTER EACH USE: To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through sprayer until all adhesive is cleared out. Then dry, replace in the bottle, secure cap. *Maximum strength may not be reached for 1-5 hours. Styrofoam may require an overnight cure.
Content: 118.2ml
E6000 Spray Adhesive is a permanent, multi-purpose latex-based adhesive without the toxic smells, fumes or unhealthy side effects.
It is strong, flexible, water-resistant, resists bleed-through and yellowing and works well on most all materials.
Follow these simple directions when using E6000 Adhesive Sprays:
1. Shake well before use.
2. Protect work area from over-spray.
3. Point spray nozzle away from face.
5. Hold bottle 20-30cm away from surface and Spray.
PAPER, PHOTOS, CARDBOARD & FOIL: Spray a thin coat to one surface. Join surfaces. Apply pressure periodically, ensuring secure contact. Dry 1-3 minutes.
POROUS MATERIALS (including foams and Styrofoam): Spray a heavy coat to both surfaces to be joined. Mate surfaces together. Allow to dry. Maximum strength usually achieved in 1-5 hours. Up to 12 hours for styrofoam.
to 12 hours for Styrofoam.
NON-POROUS MATERIALS: Spray a light coat to one surface. Mate surfaces together. Allow to dry.
IMPORTANT – CLEAN NOZZLE AFTER EACH USE: To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through sprayer until all adhesive is cleared out. Then dry, replace in the bottle, secure cap. *Maximum strength may not be reached for 1-5 hours. Styrofoam may require an overnight cure.
Content: 118.2ml